

10-inch LF driver · PR series · 300 W
60–3150 Hz
No price for delivery to the UK
Manufacturer response and impedance data, with source and trace details below. The left and right arrow keys read every shown curve at a frequency, a twelfth of an octave at a time, or an octave with Shift. Escape clears the reading.
These plotted lines are Bits digitizations of manufacturer evidence, not new measurements. How provenance works
0 degrees
Frequency response
45 degrees
Frequency response
impedance
Impedance response
FaitalPRO 10PR330 is a 10-inch 16 ohm LF driver rated at 300 W RMS. The validated T/S data includes Fs 60 Hz, Qts 0.36, Vas 32.9 L, Xmax 7.3 mm, sensitivity 94.5 dB, plus 253 cm³ Vd and 150 EBP. bits tracks UK, EU and US shop prices, price movement, datasheet links, simulator import data, and similar drivers, with a current best price of £127.04.
The published T/S values agree with each other
† Calculated by bits from the published values
What this validation status means




























Choose the published values that matter to your design. Size stays matched to this driver.
Test bench · audioXpress
Test Bench: Faital Pro's 10PR330 10" PA Woofer
Voice Coil, June 2024 · Read by Bits 29 Sep 2026
Measured with LinearX, Klippel, Loudsoft and SoundCheck rigs. After a 4 dB dip the response breaks up around 3 kHz before it rolls off, and it is 3 dB down at 30° by about 1.75 kHz, so cross it there or lower. Klippel found the suspension’s compliance, not the motor, is what limits clean excursion.
The article doesn’t say which impedance it tested.
Summaries are Bits’ own words. Each source belongs to its publisher. Report a problem
| Shop | Price | Against the lowest | Stock | Link |
|---|---|---|---|---|
Blue Aran 9-11 weeks | £112.27 | Usually available in 9-11 weeks | Visit shop at Blue Aran | |
Lean Audio | £112.27 | Back order | Visit shop at Lean Audio |