Hornresp
.txt · Hornresp driver database
Driver file ready to place in Hornresp’s Drivers folder.
Download for HornrespJensen JC10-50EL-16 16Ω
LF DriverMedia
Auto-advancing
Overview
LF DriverJet series
Jensen
Jensen JC10-50EL-16
Jensen JC10-50EL-16 is a 10" 16 ohm LF driver rated at 50W RMS. The validated T/S data includes Fs 104Hz, Qts 0.73, Vas 19.7L, Xmax 1mm, sensitivity 97.4dB, plus 33cm³ Vd. bits tracks vendor pricing, datasheet links, simulator import data, and similar drivers from the same loudspeaker database.
Partial source evidence
Automated T/S checks passed, but some material low-frequency parameters are not published for this record.
Material fields not published: Qes
- Manufacturer page linked
- Datasheet linked
- Canonical units normalized for comparison
- Vd can be derived from Sd and Xmax
Size
10"
Impedance
16Ω
RMS Power
50W
Sensitivity
97.4dB
Vd
33cm³
Datasheet traces
Frequency and impedance curves traced from the manufacturer PDF.
10" Electric Lightning 50 - 16 ohm – SPL121 ptshigh
Curve provenanceInspect 2 tracesHide details
These plotted lines reproduce manufacturer-provided structured chart data, not Bits measurements or pixel digitizations. How provenance works
- Trace jensen-structured-response/v1
10" Electric Lightning 50 - 16 ohm – SPL
Frequency response
121 plotted pointsManufacturer structured chart dataSource payload SHA-256 011cbde65008…Series 10" Electric Lightning 50 - 16 ohmHigh confidence - Trace jensen-structured-response/v1
10" Electric Lightning 50 - 16 ohm – free-air impedance
Impedance response
121 plotted pointsManufacturer structured chart dataSource payload SHA-256 011cbde65008…Series 10" Electric Lightning 50 - 16 ohmHigh confidence
T/S Parameters
Valid
Fs104Hz
Qts0.73
Qms8.3
Vas19.7L
Re12.7Ω
Le1.15mH
BL13.7Tm
Sd330cm²
Mms18g
Xmax1.0mm
SPL97dB
Power50W
Power Nominal50W
Impedance16Ω
Voice Coil38mm
Flux Density1.15T
Pricing & availability
Price definitionsNo standard offers found
Check the manufacturer website for current pricing.
Use this driver
Open it in 00 Simulator, download it for your enclosure tool, or copy the specification values.
Files use canonical values. Required mechanical fields are derived only where the target format needs them.
WinISD
.wdr · WinISD driver editor
Native WinISD driver record with the required SI conversions.
Not enough T/S data
Missing Qes
BASTA!
.bastaelement · BASTA! loudspeaker simulator
Native BASTA! element file using its documented SI-unit fields.
Download for BASTA!VituixCAD
.wdr · VituixCAD 2 Enclosure
A WinISD driver file that VituixCAD imports directly.
Not enough T/S data
Missing Qes
00 Simulator
Direct import · Web app
Start a new enclosure simulation with this driver already loaded.
Open in 00 SimulatorCopy spec sheet
Plain text · Clipboard
Copy the available values as a clean label-and-value list.
Dimensions & Physical
Weight3.0kg
Diameter259.0mm
Similar Drivers
Size stays fixed. Tune the T/S ranges to change what counts as a match, or add a specific driver to compare it directly.
Reference
Jensen
JC10-50EL-16
10"
Compare on
Matches sit inside every range. Size stays fixed automatically.
5 active T/S params, plus size. Pin a driver to open a side-by-side comparison.
Loading matches