Hornresp
.txt · Hornresp driver database
Driver file ready to place in Hornresp’s Drivers folder.
Download for HornrespJensen MOD10-70-8 8Ω
LF DriverMedia
Auto-advancing
Overview
LF DriverMod series
Jensen
Jensen MOD10-70-8
Jensen MOD10-70-8 is a 10" 8 ohm LF driver rated at 70W RMS. The validated T/S data includes Fs 99Hz, Qts 0.69, Vas 19.8L, Xmax 1.5mm, sensitivity 96.3dB, plus 50cm³ Vd and 138 EBP. bits tracks vendor pricing, datasheet links, simulator import data, and similar drivers from the same loudspeaker database.
Size
10"
Impedance
8Ω
RMS Power
70W
Sensitivity
96.3dB
98.2dBmanufacturer; using T/S-derived value (1.9dB delta).
EBP
138
Vented alignment
Vd
50cm³
Datasheet traces
Frequency and impedance curves traced from the manufacturer PDF.
Mod 10-70 - 8 ohm – SPL121 ptshigh
Curve provenanceInspect 2 tracesHide details
These plotted lines reproduce manufacturer-provided structured chart data, not Bits measurements or pixel digitizations. How provenance works
- Trace jensen-structured-response/v1
Mod 10-70 - 8 ohm – SPL
Frequency response
121 plotted pointsManufacturer structured chart dataSource payload SHA-256 66a77b885b39…Series Mod 10-70 - 8 ohmHigh confidence - Trace jensen-structured-response/v1
Mod 10-70 - 8 ohm – free-air impedance
Impedance response
121 plotted pointsManufacturer structured chart dataSource payload SHA-256 66a77b885b39…Series Mod 10-70 - 8 ohmHigh confidence
T/S Parameters
Valid
Fs99Hz
Qts0.69
Qes0.72
Qms16.3
Vas19.8L
Re5.0Ω
Le0.52mH
BL9.3Tm
Sd330cm²
Mms20g
Xmax1.5mm
SPL96dB
Power70W
Power Nominal70W
Impedance8Ω
Voice Coil38mm
Flux Density1.16T
Pricing & availability
Price definitionsNo standard offers found
Check the manufacturer website for current pricing.
Use this driver
Open it in 00 Simulator, download it for your enclosure tool, or copy the specification values.
Files use canonical values. Required mechanical fields are derived only where the target format needs them.
WinISD
.wdr · WinISD driver editor
Native WinISD driver record with the required SI conversions.
Download for WinISDBASTA!
.bastaelement · BASTA! loudspeaker simulator
Native BASTA! element file using its documented SI-unit fields.
Download for BASTA!VituixCAD
.wdr · VituixCAD 2 Enclosure
A WinISD driver file that VituixCAD imports directly.
Download for VituixCAD00 Simulator
Direct import · Web app
Start a new enclosure simulation with this driver already loaded.
Open in 00 SimulatorCopy spec sheet
Plain text · Clipboard
Copy the available values as a clean label-and-value list.
Dimensions & Physical
Weight2.5kg
Diameter259.0mm
Similar Drivers
Size stays fixed. Tune the T/S ranges to change what counts as a match, or add a specific driver to compare it directly.
Reference
Jensen
MOD10-70-8
10"
Compare on
Matches sit inside every range. Size stays fixed automatically.
5 active T/S params, plus size. Pin a driver to open a side-by-side comparison.
Loading matches