Hornresp
.txt · Hornresp driver database
Driver file ready to place in Hornresp’s Drivers folder.
Download for HornrespJensen JN12-100TRS-8 8Ω
LF DriverMedia
Auto-advancing
Overview
LF DriverJet series
Jensen
Jensen JN12-100TRS-8
Jensen JN12-100TRS-8 is a 12" 8 ohm LF driver rated at 100W RMS. The validated T/S data includes Fs 72Hz, Qts 0.52, Vas 55.9L, Xmax 1mm, sensitivity 96.5dB, plus 49cm³ Vd and 97 EBP. bits tracks vendor pricing, datasheet links, simulator import data, and similar drivers from the same loudspeaker database.
Size
12"
Impedance
8Ω
RMS Power
100W
Sensitivity
96.5dB
98.5dBmanufacturer; using T/S-derived value (2.0dB delta).
EBP
97
Either alignment
Vd
49cm³
Datasheet traces
Frequency and impedance curves traced from the manufacturer PDF.
12" Tornado Stealth 100 - 8 ohm – SPL121 ptshigh
Curve provenanceInspect 2 tracesHide details
These plotted lines reproduce manufacturer-provided structured chart data, not Bits measurements or pixel digitizations. How provenance works
- Trace jensen-structured-response/v1
12" Tornado Stealth 100 - 8 ohm – SPL
Frequency response
121 plotted pointsManufacturer structured chart dataSource payload SHA-256 f3a4adf21f01…Series 12" Tornado Stealth 100 - 8 ohmHigh confidence - Trace jensen-structured-response/v1
12" Tornado Stealth 100 - 8 ohm – free-air impedance
Impedance response
121 plotted pointsManufacturer structured chart dataSource payload SHA-256 f3a4adf21f01…Series 12" Tornado Stealth 100 - 8 ohmHigh confidence
T/S Parameters
Valid
Fs72Hz
Qts0.52
Qes0.74
Qms9.5
Vas55.9L
Re6.8Ω
Le0.70mH
BL12.9Tm
Sd491cm²
Mms30g
Xmax1.0mm
SPL97dB
Power100W
Power Nominal100W
Impedance8Ω
Voice Coil50mm
Flux Density1.20T
Pricing & availability
Price definitionsNo standard offers found
Check the manufacturer website for current pricing.
Use this driver
Open it in 00 Simulator, download it for your enclosure tool, or copy the specification values.
Files use canonical values. Required mechanical fields are derived only where the target format needs them.
WinISD
.wdr · WinISD driver editor
Native WinISD driver record with the required SI conversions.
Download for WinISDBASTA!
.bastaelement · BASTA! loudspeaker simulator
Native BASTA! element file using its documented SI-unit fields.
Download for BASTA!VituixCAD
.wdr · VituixCAD 2 Enclosure
A WinISD driver file that VituixCAD imports directly.
Download for VituixCAD00 Simulator
Direct import · Web app
Start a new enclosure simulation with this driver already loaded.
Open in 00 SimulatorCopy spec sheet
Plain text · Clipboard
Copy the available values as a clean label-and-value list.
Dimensions & Physical
Weight2.2kg
Diameter307.0mm
Similar Drivers
Size stays fixed. Tune the T/S ranges to change what counts as a match, or add a specific driver to compare it directly.
Reference
Jensen
JN12-100TRS-8
12"
Compare on
Matches sit inside every range. Size stays fixed automatically.
5 active T/S params, plus size. Pin a driver to open a side-by-side comparison.
5 matches
Compare a specific driver
Added drivers stay at the front of the list, whatever the ranges say.
91%
Similarity
Jensen
JN12-80TRS-8
12"
Xmax1mm0%
Qts0.55+6%
BL12.2Tm-6%
Vas56.5L+1%
Qes0.71-4%
78%
Similarity
Jensen
MOD12-130-8
12"
Xmax1mm0%
Qts0.49-6%
BL15.2Tm+17%
Vas38.4L-31%
Qes0.76+3%
74%
Similarity
Jensen
C12K-2-8
12"
Xmax1mm0%
Qts0.47-10%
BL14.7Tm+14%
Vas43.1L-23%
Qes0.62-16%
74%
Similarity
Jensen
JN12-100TR-4
12"
Xmax1mm0%
Qts0.58+12%
BL9Tm-30%
Vas47.2L-16%
Qes0.740%
73%
Similarity
Jensen
C12-75NH-8
12"
Xmax1mm0%
Qts0.64+23%
BL11.8Tm-9%
Vas42.4L-24%
Qes0.76+3%