Hornresp
.txt · Hornresp driver database
Driver file ready to place in Hornresp’s Drivers folder.
Download for HornrespDayton Audio RS100P-4 4Ω
LF DriverMedia
Auto-advancing
Overview
LF Driver
Dayton Audio
Dayton Audio RS100P-4
Dayton Audio RS100P-4 is a 4" 4 ohm LF driver rated at 30W RMS. The validated T/S data includes Fs 85Hz, Qts 0.54, Vas 1.9L, Xmax 4mm, sensitivity 84.3dB, plus 15cm³ Vd and 127 EBP. bits tracks vendor pricing, datasheet links, simulator import data, and similar drivers from the same loudspeaker database.
Size
4"
Impedance
4Ω
RMS Power
30W
Sensitivity
84.3dB
88.5dBmanufacturer; using T/S-derived value (4.2dB delta).
EBP
127
Vented alignment
Vd
15cm³
Datasheet traces
Frequency and impedance curves traced from the manufacturer PDF.
15 degrees226 ptsp1medium
30 degrees185 ptsp1medium
on-axis240 ptsp1medium
Curve provenanceInspect 4 tracesHide details
These plotted lines are Bits digitizations of manufacturer evidence, not new measurements. How provenance works
- Trace datasheet-response-trace-poc/v1
15 degrees
Frequency response
226 plotted pointsMedium confidence693 selected pixels of 1,204 - Trace datasheet-response-trace-poc/v1
30 degrees
Frequency response
185 plotted pointsMedium confidence445 selected pixels of 1,089 - Trace datasheet-response-trace-poc/v1
on-axis
Frequency response
240 plotted pointsMedium confidence1,267 selected pixels of 1,267 - Trace datasheet-response-trace-poc/v1
impedance
Impedance response
240 plotted pointsMedium confidence1,306 selected pixels of 1,306
T/S Parameters
Valid
Fs85Hz
Qts0.54
Qes0.67
Qms2.7
Vas1.9L
Re3.0Ω
Le0.26mH
BL3.0Tm
Sd36cm²
Mms4g
Xmax4.0mm
SPL84dB
Power30W
Impedance4Ω
F Low85Hz
F High13500Hz
Pricing & availability
Price definitionsUse this driver
Open it in 00 Simulator, download it for your enclosure tool, or copy the specification values.
Files use canonical values. Required mechanical fields are derived only where the target format needs them.
WinISD
.wdr · WinISD driver editor
Native WinISD driver record with the required SI conversions.
Download for WinISDBASTA!
.bastaelement · BASTA! loudspeaker simulator
Native BASTA! element file using its documented SI-unit fields.
Download for BASTA!VituixCAD
.wdr · VituixCAD 2 Enclosure
A WinISD driver file that VituixCAD imports directly.
Download for VituixCAD00 Simulator
Direct import · Web app
Start a new enclosure simulation with this driver already loaded.
Open in 00 SimulatorCopy spec sheet
Plain text · Clipboard
Copy the available values as a clean label-and-value list.
Dimensions & Physical
Diameter98.0mm
Overall Depth51.0mm
Cutout Diameter77.2mm
Similar Drivers
Size stays fixed. Tune the T/S ranges to change what counts as a match, or add a specific driver to compare it directly.
Reference
Dayton Audio
RS100P-4
4"
Compare on
Matches sit inside every range. Size stays fixed automatically.
5 active T/S params, plus size. Pin a driver to open a side-by-side comparison.
5 matches
Compare a specific driver
Added drivers stay at the front of the list, whatever the ranges say.
89%
Similarity
£29.57
Dayton Audio
RS100-4
4"
Xmax4mm0%
Qts0.53-2%
BL3.2Tm+8%
Vas1.4L-22%
Qes0.66-1%
77%
Similarity
£29.57
Dayton Audio
RS100P-8
4"
Xmax3.7mm-7%
Qts0.540%
BL4Tm+34%
Vas1.8L-2%
Qes0.71+6%
44%
Similarity
Tang Band
W4-2099
4"
Xmax3mm-25%
Qts0.47-13%
BL3.7Tm+26%
Vas2.8L+48%
Qes0.54-19%
Image unavailable
39%
Similarity
Wavecor
SW084OM01
3"
Xmax4.5mm+13%
Qts0.44-19%
BL3.6Tm+21%
Vas1.7L-9%
Qes0.46-31%
34%
Similarity
Peerless
TG9FC02-04
4"
Xmax3mm-24%
Qts0.43-20%
BL3.9Tm+31%
Vas0.8L-55%
Qes0.52-22%