Hornresp
.txt · Hornresp driver database
Driver file ready to place in Hornresp’s Drivers folder.
Download for HornrespJensen MOD12-130-16 16Ω
LF DriverMedia
Auto-advancing
Overview
LF DriverMod series
Jensen
Jensen MOD12-130-16
Jensen MOD12-130-16 is a 12" 16 ohm LF driver rated at 130W RMS. The validated T/S data includes Fs 92Hz, Qts 0.73, Vas 31.6L, Xmax 2mm, sensitivity 98.2dB, plus 98cm³ Vd. bits tracks vendor pricing, datasheet links, simulator import data, and similar drivers from the same loudspeaker database.
Partial source evidence
Automated T/S checks passed, but some material low-frequency parameters are not published for this record.
Material fields not published: Qes
- Manufacturer page linked
- Datasheet linked
- Canonical units normalized for comparison
- Vd can be derived from Sd and Xmax
Size
12"
Impedance
16Ω
RMS Power
130W
Sensitivity
98.2dB
Vd
98cm³
Datasheet traces
Frequency and impedance curves traced from the manufacturer PDF.
Mod 12-130 - 16 ohm – SPL121 ptshigh
Curve provenanceInspect 2 tracesHide details
These plotted lines reproduce manufacturer-provided structured chart data, not Bits measurements or pixel digitizations. How provenance works
- Trace jensen-structured-response/v1
Mod 12-130 - 16 ohm – SPL
Frequency response
121 plotted pointsManufacturer structured chart dataSource payload SHA-256 57da3cdad63b…Series Mod 12-130 - 16 ohmHigh confidence - Trace jensen-structured-response/v1
Mod 12-130 - 16 ohm – free-air impedance
Impedance response
121 plotted pointsManufacturer structured chart dataSource payload SHA-256 57da3cdad63b…Series Mod 12-130 - 16 ohmHigh confidence
T/S Parameters
Valid
Fs92Hz
Qts0.73
Qms19.9
Vas31.6L
Re11.9Ω
Le1.00mH
BL17.1Tm
Sd491cm²
Mms32g
Xmax2.0mm
SPL98dB
Power130W
Power Nominal130W
Impedance16Ω
Voice Coil50mm
Flux Density1.25T
Pricing & availability
Price definitionsNo standard offers found
Check the manufacturer website for current pricing.
Use this driver
Open it in 00 Simulator, download it for your enclosure tool, or copy the specification values.
Files use canonical values. Required mechanical fields are derived only where the target format needs them.
WinISD
.wdr · WinISD driver editor
Native WinISD driver record with the required SI conversions.
Not enough T/S data
Missing Qes
BASTA!
.bastaelement · BASTA! loudspeaker simulator
Native BASTA! element file using its documented SI-unit fields.
Download for BASTA!VituixCAD
.wdr · VituixCAD 2 Enclosure
A WinISD driver file that VituixCAD imports directly.
Not enough T/S data
Missing Qes
00 Simulator
Direct import · Web app
Start a new enclosure simulation with this driver already loaded.
Open in 00 SimulatorCopy spec sheet
Plain text · Clipboard
Copy the available values as a clean label-and-value list.
Dimensions & Physical
Weight4.3kg
Diameter307.0mm
Similar Drivers
Size stays fixed. Tune the T/S ranges to change what counts as a match, or add a specific driver to compare it directly.
Reference
Jensen
MOD12-130-16
12"
Compare on
Matches sit inside every range. Size stays fixed automatically.
5 active T/S params, plus size. Pin a driver to open a side-by-side comparison.
Loading matches