Hornresp
.txt · Hornresp driver database
Driver file ready to place in Hornresp’s Drivers folder.
Download for HornrespJensen C12Q-8 8Ω
LF DriverMedia
Auto-advancing
Overview
LF DriverVintage Ceramic series
Jensen
Jensen C12Q-8
Jensen C12Q-8 is a 12" 8 ohm LF driver rated at 35W RMS. The validated T/S data includes Fs 88Hz, Qts 2.23, Vas 38L, Xmax 1.5mm, sensitivity 92.2dB, plus 74cm³ Vd and 35 EBP. bits tracks vendor pricing, datasheet links, simulator import data, and similar drivers from the same loudspeaker database.
Size
12"
Impedance
8Ω
RMS Power
35W
Sensitivity
92.2dB
93.2dBmanufacturer; using T/S-derived value (1.0dB delta).
EBP
35
Sealed alignment
Vd
74cm³
Datasheet traces
Frequency and impedance curves traced from the manufacturer PDF.
C12Q - 8 ohm – SPL121 ptshigh
Curve provenanceInspect 2 tracesHide details
These plotted lines reproduce manufacturer-provided structured chart data, not Bits measurements or pixel digitizations. How provenance works
- Trace jensen-structured-response/v1
C12Q - 8 ohm – SPL
Frequency response
121 plotted pointsManufacturer structured chart dataSource payload SHA-256 d4d202f44b7a…Series C12Q - 8 ohmHigh confidence - Trace jensen-structured-response/v1
C12Q - 8 ohm – free-air impedance
Impedance response
121 plotted pointsManufacturer structured chart dataSource payload SHA-256 d4d202f44b7a…Series C12Q - 8 ohmHigh confidence
T/S Parameters
Valid
Fs88Hz
Qts2.23
Qes2.47
Qms12.9
Vas38.0L
Re6.0Ω
Le0.63mH
BL6.0Tm
Sd491cm²
Mms30g
Xmax1.5mm
SPL92dB
Power35W
Power Nominal35W
Impedance8Ω
Voice Coil32mm
Flux Density0.92T
Pricing & availability
Price definitionsNo standard offers found
Check the manufacturer website for current pricing.
Use this driver
Open it in 00 Simulator, download it for your enclosure tool, or copy the specification values.
Files use canonical values. Required mechanical fields are derived only where the target format needs them.
WinISD
.wdr · WinISD driver editor
Native WinISD driver record with the required SI conversions.
Download for WinISDBASTA!
.bastaelement · BASTA! loudspeaker simulator
Native BASTA! element file using its documented SI-unit fields.
Download for BASTA!VituixCAD
.wdr · VituixCAD 2 Enclosure
A WinISD driver file that VituixCAD imports directly.
Download for VituixCAD00 Simulator
Direct import · Web app
Start a new enclosure simulation with this driver already loaded.
Open in 00 SimulatorCopy spec sheet
Plain text · Clipboard
Copy the available values as a clean label-and-value list.
Dimensions & Physical
Weight1.8kg
Diameter306.0mm
Similar Drivers
Size stays fixed. Tune the T/S ranges to change what counts as a match, or add a specific driver to compare it directly.
Reference
Jensen
C12Q-8
12"
Compare on
Matches sit inside every range. Size stays fixed automatically.
5 active T/S params, plus size. Pin a driver to open a side-by-side comparison.
Loading matches