Hornresp
.txt · Hornresp driver database
Driver file ready to place in Hornresp’s Drivers folder.
Download for HornrespJensen C12Q-16 16Ω
LF DriverMedia
Auto-advancing
Overview
LF DriverVintage Ceramic series
Jensen
Jensen C12Q-16
Jensen C12Q-16 is a 12" 16 ohm LF driver rated at 35W RMS. The validated T/S data includes Fs 86Hz, Qts 1.99, Vas 46.3L, Xmax 1.5mm, sensitivity 93.9dB, plus 74cm³ Vd. bits tracks vendor pricing, datasheet links, simulator import data, and similar drivers from the same loudspeaker database.
Partial source evidence
Automated T/S checks passed, but some material low-frequency parameters are not published for this record.
Material fields not published: Qes
- Manufacturer page linked
- Datasheet linked
- Canonical units normalized for comparison
- Vd can be derived from Sd and Xmax
Size
12"
Impedance
16Ω
RMS Power
35W
Sensitivity
93.9dB
Vd
74cm³
Datasheet traces
Frequency and impedance curves traced from the manufacturer PDF.
C12Q - 16 ohm – SPL121 ptshigh
Curve provenanceInspect 2 tracesHide details
These plotted lines reproduce manufacturer-provided structured chart data, not Bits measurements or pixel digitizations. How provenance works
- Trace jensen-structured-response/v1
C12Q - 16 ohm – SPL
Frequency response
121 plotted pointsManufacturer structured chart dataSource payload SHA-256 d4d202f44b7a…Series C12Q - 16 ohmHigh confidence - Trace jensen-structured-response/v1
C12Q - 16 ohm – free-air impedance
Impedance response
121 plotted pointsManufacturer structured chart dataSource payload SHA-256 d4d202f44b7a…Series C12Q - 16 ohmHigh confidence
T/S Parameters
Valid
Fs86Hz
Qts1.99
Qms10.2
Vas46.3L
Re12.0Ω
Le0.95mH
BL8.2Tm
Sd491cm²
Mms24g
Xmax1.5mm
SPL94dB
Power35W
Power Nominal35W
Impedance16Ω
Voice Coil32mm
Flux Density0.92T
Pricing & availability
Price definitionsNo standard offers found
Check the manufacturer website for current pricing.
Use this driver
Open it in 00 Simulator, download it for your enclosure tool, or copy the specification values.
Files use canonical values. Required mechanical fields are derived only where the target format needs them.
WinISD
.wdr · WinISD driver editor
Native WinISD driver record with the required SI conversions.
Not enough T/S data
Missing Qes
BASTA!
.bastaelement · BASTA! loudspeaker simulator
Native BASTA! element file using its documented SI-unit fields.
Download for BASTA!VituixCAD
.wdr · VituixCAD 2 Enclosure
A WinISD driver file that VituixCAD imports directly.
Not enough T/S data
Missing Qes
00 Simulator
Direct import · Web app
Start a new enclosure simulation with this driver already loaded.
Open in 00 SimulatorCopy spec sheet
Plain text · Clipboard
Copy the available values as a clean label-and-value list.
Dimensions & Physical
Weight1.8kg
Diameter306.0mm
Similar Drivers
Size stays fixed. Tune the T/S ranges to change what counts as a match, or add a specific driver to compare it directly.
Reference
Jensen
C12Q-16
12"
Compare on
Matches sit inside every range. Size stays fixed automatically.
5 active T/S params, plus size. Pin a driver to open a side-by-side comparison.
Loading matches